Ramps for Motorcycles, ATVs, Golf Carts, Lawn Mowers and more.
Motorcycle ramps make loading up a snap.
Extra long and strong ramps make it safer and faster for a single
person to load and unload. These ramps can also be used to load
your garden equipment, golf carts and more.
Would you rather
have more room in the back of your pickup? Maybe you would prefer
a hitch-mounted carrier for your motorcycle. Click to see our motorcycle
carriers >>
Big Boy II - 2 Piece Ramp System
The Big Boy 2 arched
loading ramp system is by far the most innovative ramp system to
hit the market! Packed full of features allowing you to load motorcycles,
ATV’s, golf carts, UTV’s, zero turn lawnmowers, and
just about any pneumatic wheel vehicle up to 2500 lbs! The Big Boy
2 is constructed of lightweight, rustproof aluminum and consists
of 2 separate single runner ramps that can be connected together
in seconds with (2) included connecting brackets. The arched loading
ramp system folds in half at the center for storage, and when unfolded,
features a 12° offset for greater clearance for lower vehicles.
The Big Boy 2 comes in a 10 foot and 12 foot length
to meet most loading height requirements and is 38 inches wide when
both ramps are connected together(19" wide per ramp). Additional
ramps can be purchased separately and locked together to make greater
widths. Each Big Boy 2 includes 2 cam buckle straps for loading
safety and a 5 year manufacturers warranty! Made in the USA!
Features:
Consists of 2 single runner arched loading ramps
Connect the 2 ramps together with (2) included
connecting brackets
Serrated cross rungs for maximum traction
2 cam buckle safety straps
Full width plate style attaching lip for extra
strength
Lightweight, rust proof aluminum construction
5 year manufacturer warranty
Made in the USA
Big Boy II Ramps
Size Information
Price
Big Boy II Two-Piece Folding Ramp System - 96-inch
Our original Big Boy arched, folding
motorcycle loading ramps are the Cadillac of the loading ramp industry
and we believe are the lightest full size motorcycle loading ramps
on the market today. The Big Boy system is 10 feet (120 inches)
long and 38 inches wide to allow the rider to put their feet down
while loading and unloading. The arched design prevents bottoming
out of the motorcycle. For storage these ramps fold in half to fit
right next to the motorcycle or break down further into 3 sections
that fold in half in seconds with the removal of the connecting
rod that connects the 3 separate sections together for compact storage
even in the truck cab.
Features:
All 3 ramps weigh only 74 lbs., the lightest
full-size motorcycle ramp anywhere!
All Aluminum (T6-6061) construction will provide
years of rust free use
3 folding sections for compact storage
Center connecting rods keeps ramp sections secure
Serrated cross rungs for maximum traction
2 heavy duty 1” wide cam buckle safety
straps included
Full width plate style attaching lip
1500 lb. distributed weight capacity
Designed for 1 person loading and unloading
5 year manufacturer warranty
Big Boy Original Ramps
Size Information
Price
Big Boy Three-Piece Folding Ramp System - 120-inch
120" L x 38 W" (14" center, 12" sides) Unfolded Size
Use these heavy duty folding
ramps to load motorcycles, ATVs, UTVs and tractors. The ramp system
is constructed of aluminum and can be separated into dual ramps
or connected for a solid 38-inch wide ramp. A built in offset arch
in the ramps provide extra clearance for lower bikes or ATVs. Extra
heavy duty serrated plates replace the standard rung design. There
are three lengths available with varying weight capacities from
1500 lbs. to 2000 lbs. These heavy duty ramps include safety straps
to keep secured to the loading surface. Designed for 1 person loading
and unloading. Quality built in the USA!
Features:
Available in 3 lengths
Load motorcycles or ATV’s by yourself
All aluminum construction – lightweight
– rust proof
Solid plate attaching lip
Extra wide plate style serrated rungs offer
maximum traction in the rain, mud or snow.
Stronger than the traditional “rung”
design.
Heavy duty hinge system folds in half for storage
Use together as a solid ramp or spread apart
as dual runners
Includes safety straps to tie down to the loading
surface
The Black Widow X-tra Wide folding
arched ramps are designed for loading today’s current trend
of larger, heavier ATVs. These ramps are 17” wide, fold in
half and have a loading capacity of 1500 lbs. per runner. These
aluminum ramps are arched for additional clearance and will accommodate
even the largest 4 or 6 wheel ATVs on the market today. These ramps
also work great for loading tractors, golf carts or other wheeled
equipment.
Features:
Available in 2 lengths
Folds in half for easy storage and transport
Lightweight all aluminum design w/ black powder coat
3000 lb. total capacity (1500 lb. per section)
Arched design to increase clearance
Serrated cross rungs for maximum traction with 4” spacing
3 heavy duty 1” wide cam buckle safety straps
Full width plate style attaching lip
Extra wide for today’s larger ATVs
5 year manufacturer warranty
X-tra Wide Arched Folding Ramps
Size Information
Price
X-tra Wide Heavy Duty Folding Arched Ramp 2-Piece - 94.5-inch
The Black Widow folding arched ramps fold to half their length and adjust to fit the width of any ATV or garden tractor set. These ramps are 11.25" wide and fold in half . These aluminum ramps are arched for additional clearance and are available in 3 lengths to work with any truck or trailer height. These ramps also work great for loading small garden tractors, lawn equipment or other wheeled equipment.
Features:
Available in 3 lengths
Folds in half for easy storage and transport
Lightweight all aluminum design w/ black powder coat (NOTE: 120" available in silver only.)
1200 lb. total capacity (600 lb. per section)
Arched design to increase clearance
Serrated cross rungs for maximum traction with 4” spacing
This pair of ramps is 12 inches wide each and fold to half their length for compact storage in your truck bed, truck cab or under your quad. SF series ramps consist of all aluminum construction for years of rust free use. The convenient carrying handle make transporting and storage of the ramps a snap. With the slight built in arch and 90 inches of length you will be able to load a 4 wheeler into all 2 wheel drive and most standard height 4×4 trucks. For garden tractors with low deck clearance, a longer arch ramp may be necessary for high 4×4 trucks.
Features:
Built in carry handle to carry like a suitcase
Slight arch helps preventing in bottoming out or scraping of machinery (i.e. low clearance ATV’s)
Serrated Rungs at a spacing of 3” exhibits a non-skid surface second to none
Full width attaching lip for maximum tailgate contact
Durable all aluminum (T6 – 6061 aircraft grade) construction will provide for many years of non-rusting safe use
Our single folding motorcycle ramp
is designed for loading of off road and motocross bikes. This ramp
is available with rungs and in our plate style solid surface. Both
styles are all aluminum and fold in half for compact storage.
Features:
Folds in half for storage & transport
Lightweight All aluminum
Arched design to increase clearance
Serrated cross rungs for maximum traction
Heavy duty 1-inch wide cam buckle safety strap
Rubber coated fingers protect tailgate
Includes one (1) safety strap to secure ramp when in use
Light Duty Single Folding Ramps
Size Information
Price
Rung Style Single Light Duty Folding Ramp - 89-inch